Diamatic Benelux
diamatic header0.jpgdiamatic header1.jpgdiamatic header3.jpgdiamatic header4.jpgdiamatic header5.jpg

BMP-4000

The Diamatic BMP-4000 is a new heavy duty ride-on sawing (shaving) and milling machine ideally suited for large milling and sawing applications, for example road construction and industrial flooring. The BMP-4000 is a multifunctional machine. By changing the hydraulic motor you can easily swap the milling and the sawing technology. It has a double, hydraulic micrometric adjustment to set the working depth, to work very precisely and eliminate the risk of underground deterioration. Due to its increased weight it allows you to generate more efficient and precise sawing and milling actions.
 
To change the milling settings into the correct sawing it only takes you 60 minutes. Due to the fact that you’re able to place 78 blades on one drum the sawing pattern is very fine. By using more spacers and fewer blades the sawing pattern can be changed. The drum housing is completely sealed in order to reduce the substance created and with a 5” dust hose connection, the machine is able to work almost dust free. 

 
360 rotation

 
  • It’s the only ride-on milling machine which can also be used as a sawing machine.
  • Possibility to remove up to 65 mm of concrete (depending on type of surface) in several passes.
  • Sawing pattern is very fine, because of the numerous blades on one drum.
  • Complete sealed drum housing for reducing substance.
  • By using more spacers and fewer blades the sawing pattern can be changed.
  • Combination machine, which is easy to change from sawing machine into milling machine and vice versa.
  • Comfortable to use, easy to move, low vibrations.
  • Several optional tools for each different application.
  • Fits through every door opening due to the unbelievably narrow width of only 840 mm!
  • Optional soot filter for diesel engine to work inside buildings.
  • Can work up to 30 mm from the edge.
  • Optional radio remote system on machines.
  • Electric control system for safe working.
  • Memorized drum adjustment system.
  • When the wheels fold in, the drive wheel automatically changes direction.

 


Applications

Due to the fact that the BMP-4000 can fit a milling or a sawing drum, it is the right type of equipment for cutting, removing and sawing concrete, asphalt and natural stone surface to a depth of up to 60 mm with sawing and 65 mm with milling in several passes. To receive advice or more information about the BMP-4000 possibility's or to find the best products for your surface preparation applications, contact Diamatic. 
 
Technical Information
Working width Milling 400 mm / Sawing 380 mm
Motor power electric 30 kW / 400 V – 50 Hz / 63 A connection – Three phase
Motor power diesel 34 kW / 3 cylinder diesel engine
Working speed 0-35 m/min
Weight 1.550 kg
Dimensions L / W / H 1.995mm / 840mm / 1.550mm (1.512mm width when wheels are folded out)
Drive system / Speed Hydraulic / 0-10 km/h
Push / Pull machine Ride-on
Surface Concrete / Stone / Asphalt
Accessories
Milling drum – empty E07774
Milling picks concrete E07777
Milling picks asphalt E07766
Milling pick changing tool E08780
Drum changing set complete E08965
Sawing drum – empty E08712
Blades ø400mm green E08714
Spacer ring 2,5 mm E08928
15m suction hose ø130mm 492019
Soot filter for diesel E08969
Personal safety features On request
Dust collector BDC-99

pdf-file